珊瑚状Ni2P修饰新型四足状Cd0.9Zn0.1SZB/WZ同质结光催化剂的高效可见光光催化产氢

随着社会发展,传统化石能源消耗加剧,人类迫切需要开发新型的清洁能源.半导体光催化分解水产氢是一种非常具有潜力解决能源危机的清洁技术.目前,金属硫化物半导体有着合适的能带结构和高效的光催化产氢能力而得到了广泛的研究.通常,为了提高光催化剂产氢性能,添加贵金属助催化剂是一个行之有效的方法.但是贵金属昂贵的价格限制了其大规模的应用,因此有必要研究储量丰富,价格低廉的高效助催化剂.Ni₂P,CoP,Co₂P,MoP,Cu₃P等过渡金属磷化物具有价格低廉,优异的稳定性和催化性能而被用作电催化产氢的催化剂.通常,用于电催化产氢的催化剂往往可以作为光催化产氢的助催化剂.众所周知,催化性能与材料的形貌密切相关,因此,具有棒状、中空、片状等形貌的金属硫化物被制备并用于光催化产氢.然而,四足状结构的金属硫化物研究较少.在已有的Ni₂P(NP)相关研究中,仅合成了纳米颗粒状的NP.本文成功合成了四足状Cd_0.9Zn_0.1S(CZS)和珊瑚状形貌的NP,进一步得到一系列Ni₂P-Cd_0.9Zn_0.1S(NPCZS)光催化剂,采用XRD,SEM,TEM,XPS和ICP-AES测试了样品的结构、形貌、表面成分和元素含量,并测试了样品的光催化产氢性能.采用水热法合成的CZS样品具有特殊的四足状形貌,足部由纳米棒组成.XRD结果表明,四足状CZS中立方相(WZ)和六方相(ZB)共存.经TEM进一步分析,发现CZS中心部位呈ZB相结构,而足部却是WZ相.经光催化性能测试,这种新型四足状CZS表现出优异的光催化产氢性能.进一步通过超声或研磨破坏四足状结构后,发现CZS的产氢性能显著下降,说明四足状形貌是材料性能提高的关键.通过分析WZ和ZB两物相的价带顶和导带底的电位发现,ZB/WZ间形成的同质结可以加速光生载流子的分离和传输.NP也采用水热法制备,其具有珊瑚状形貌.该形貌具有高的比表面积,可以提供更多的活性位点,进一步提高了材料的光催化性能.光催化性能测试表明,NP负载量为12 wt%的NPCZS-12样品表现出很好的产氢性能(l.88 mmol h^-1),是纯CZS的1.43倍.同时,NPCZS-12具有良好的光稳定性和循环使用性能.结合光催化实验、光谱实验、表面光电压和电化学测试的结果发现,四足状形貌、同质结和NP助催化剂的协同效应是NPCZS具有良好光催化性能的主要原因.     

Comparison of the Structural Evolution of β Polypropylene during the Sequential and Simultaneous Biaxial Stretching Process

In this work, the lamellar structural evolution and microvoids variations of β polypropylene(β-PP) during the processing of two different stretching methods, sequential biaxial stretching and simultaneous biaxial stretching, were investigated in detail. It was found that different stretching methods led to significantly different lamellae deformation modes, and the microporous membranes obtained from the simultaneous biaxial stretching exhibited better mechanical properties. For the sequential biaxial stretching, abundant coarse fibers originated from the tight accumulation of the lamellae parallel to the longitudinal stretching direction, whereas the lamellae perpendicular to the stretching direction were easily deformed and separated. Those coarse fibers were difficult to be separated to form micropores during the subsequent transverse stretching process, resulting in a poor micropores distribution. However, for the simultaneous biaxial stretching, the β crystal had the same deformation mode, that is, the lamellae distributed in different directions were all destroyed, forming abundant microvoids and little coarse fibers.     

Influence of Carbon Nanotubes on Phase Composition,Thermal and Post-Heating Behavior of Cementitious Composites

This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to elevated temperatures. Cement mortars with small dosages of CNTs, 0.05% and 0.2% by weight of cement, were prepared and then heated at 25 °C, 150 °C, 200 °C, 450 °C, and 600 °C for two hours before being tested. The results show positive impact of the CNTs on the hydration process of cement mortar at room temperature and at higher temperatures up to 200 °C. Decomposition of the hydration products is obvious at 450 °C, whereas sever deterioration in the microstructure occurs at 600 °C. The nano reinforcement and bridging effect of the CNTs are obvious up to 450 °C. Thermal behavior characterization shows that CNTs incorporation enhances the thermal conductivity of the unheated and heat-treated mortar specimens. The decomposition of the hydration products needs more heat in the presence of CNTs. Finally, presence of CNTs significantly enhances the residual compressive and flexural strengths of heated mortar specimens for all studied temperatures.     

Recent advances in the improvement of g-C3N4 based photocatalytic materials

g-C₃N₄ have been widely used in the fields of photocatalytic hydrogen production,photocatalytic degradation of dyes and oxidative degradation of toxic gases due to their excellent performance.It has attracted extensive attention in recent years due to its highly efficient photocatalytic capacity of hydrogen generation,water oxidation,carbon dioxide reduction and degradation of organic pollutants.Because of the abundant carbon and nitrogen composition of the earth,large-scale production and industrial applications of this material are possible.The modification of this material makes its performance more excellent so that this new material can obtain a steady stream of vitality.These outstanding works have become important materials and milestones on the road to mankind's photocatalytic hydrogen production.This review will begin with the basic idea of designing,synthesizing and improving g-C₃N₄ based photocatalytic materials,and introduce the latest development of g-C₃N₄ photocatalysts in hydrogen production from four aspects of controlling the carbon/nitrogen ratio,morphology,element doping and heterojunction structure of g-C₃N₄ materials.     

直接Z型LaNiO3/Mn0.2Cd0.8S异质结催化剂光解水产氢性能及机理探究

以LaNiO_3纳米颗粒为基质,在水热法制备CdS的过程中引入Mn~(2+)离子,原位合成直接Z型LaNiO_3/Mn_(0.2)Cd_(0.8)S异质结光催化剂。分别采用场发射扫描电镜、X射线衍射、X射线光电子能谱、紫外可见漫反射光谱、氮气吸附-脱附测试以及电化学测试等分析方法对制备的催化剂进行表征。在光解水产氢测试中,LaNiO_3/Mn_(0.2)Cd_(0.8)S异质结光催化剂在5 h的H_2产量达到1 190.3μmol,相较于CdS和Mn_(0.2)Cd_(0.8)S,其H_2产量分别提高了 25倍和10倍。荧光和电化学实验证实,Mn~(2+)的引入能够有效地促进光生载流子的分离,同时LaNiO_3/Mn_(0.2)Cd_(0.8)S之间异质结的构筑能有效地促进光生载流子在界面间的迁移、分离,从而促进其光解水产氢效率和稳定性的提高。结合一系列表征和活性测试结果提出直接Z型光解水反应机理,很好地阐述了其光解水产氢活性和稳定性的增强。     

碳自掺杂石墨相氮化碳纳米片的制备及其在可见光照射下的光解水产氢性能

石墨相氮化碳(g?C3N4)由于具有对可见光吸收范围较窄和光生载流子分离效率低等缺陷,其光解水产氢活性较差。我们采用简单的一步热共聚法,以尿素和2,4,6?三氨基嘧啶(TAPD)混合物为前驱物,制备碳自掺杂纳米片(CNNS?x,x mg代表掺入TAPD的质量)。X射线衍射(XRD)、元素分析(EA)和X射线光电子能谱(XPS)等测试结果表明,来自TAPD的嘧啶环成功引入g?C3N4共轭体系中,使所得的CNNS?x具有较窄的带隙,较快的光生载流子迁移速率,从而提高其对可见光的吸收效率和光生载流子的分离效率。得益于此,CNNS?x在可见光照射下表现出较好的光解水产氢活性。特别是CNNS?30具有最佳光解水性能,其产氢速率可达57.6μmol·h-1,是g?C3N4纳米片(CNNS)的4倍。     

Cu/MoS2的熔盐电解法制备及其在碱性条件下析氢反应性能的提高

通过熔盐电解法并掺杂过渡金属Cu制备2种不同纳米结构的Cu/MoS_2。采用涂敷法制备工作电极,通过X射线衍射(XRD)、透射电子显微镜(TEM)、能量散射X射线谱(EDS)、扫描电子显微镜(SEM)、选区电子衍射(SAED)以及各种电化学手段验证了其结构和性能。结果表明,纳米片状Cu/MoS_2在碱性溶液(1 mol·L~(-1)KOH)中表现出优异的析氢催化性能:在电流密度为10 mA·cm~(-2)时过电位为199.6 mV,Tafel斜率为59 mV·dec~(-1),双电层电容为26.1 mF·cm~(-2),等效电荷转移电阻为12.4Ω,具有较为良好的电化学耐久性和稳定性。     

泡沫镍负载Fe2O3@Ni3S2纳米线网状结构电极的制备及其电催化析氧性能

通过两步水热法制备泡沫镍(NF)负载Fe_2O_3纳米粒子@Ni_3S_2纳米线网状结构电极(Fe_2O_3@Ni_3S_2/NF)。运用X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、N_2吸附-脱附测试等方法对电极材料的物相和微观结构特征等进行了表征。水热条件下原位表面化学刻蚀生成的Ni_3S_2纳米线与三维多孔NF基体间拥有强结合力和低界面电阻,Fe_2O_3粒子均匀分布在纳米线的表面。在1 mol·L~(-1)的KOH溶液中,运用线性扫描伏安测试(LSV)、计时电位法、电化学交流阻抗测试(EIS)等对电极的电催化析氧(OER)性能进行了测试。结果表明:在100 mA·cm~(-2)的超高电流密度下,Fe_2O_3@Ni_3S_2/NF电极的OER过电势仅为223 mV,比Ni_3S_2/NF材料的过电势降低了285 mV;经过10 h计时电位测试,性能保持率高达80%。     

CompassR Yields Highly Organic-Solvent-Tolerant Enzymes through Recombination of Compatible Substitutions

The CompassR (computer-assisted recombination) rule enables, among beneficial substitutions, the identification of those that can be recombined in directed evolution. Herein, a recombination strategy is systematically investigated to minimize experimental efforts and maximize possible improvements. In total, 15 beneficial substitutions from Bacillus subtilis lipase A (BSLA), which improves resistance to the organic cosolvent 1,4-dioxane (DOX), were studied to compare two recombination strategies, the two-gene recombination process (2GenReP) and the in silico guided recombination process (InSiReP), employing CompassR. Remarkably, both strategies yielded a highly DOX-resistant variant, M4 (I12R/Y49R/E65H/N98R/K122E/L124K), with up to 14.6-fold improvement after screening of about 270 clones. M4 has a remarkably enhanced resistance in 60 % (v/v) acetone (6.0-fold), 30 % (v/v) ethanol (2.1-fold), and 60 % (v/v) methanol (2.4-fold) compared with wild-type BSLA. Molecular dynamics simulations revealed that attracting water molecules by charged surface substitutions is the main driver for increasing the DOX resistance of BSLA M4. Both strategies and obtained molecular knowledge can likely be used to improve the properties of other enzymes with a similar α/β-hydrolase fold.     

The Roles of Composition and Mesostructure of Cobalt-Based Spinel Catalysts in Oxygen Evolution Reactions

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co₃O₄, MgCo₂O₄, Co₂FeO₄, Co₂AlO₄ and CoFe₂O₄. The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H₂O₂ decomposition. Studying the effect of dominant surface termination, isotropic Co₃O₄ and CoFe₂O₄ catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co³⁺ plays the major role for high activity. In H₂O₂ decomposition, Co²⁺ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.